Mattress Posts

Furniture -Beds

Wednesday, September 1st, 2010

Beds have been around since before the Egyptians, who also used the bed as a place where you could eat as well as sleep.

The Romans often decorated their beds in precious metals such as gold and silver.  Mattresses in those days featured materials such as wool, feathers, hay and reeds.

The 18th Century saw a big jump in terms of  sleeping because cotton was used for the mattresses.  This meant that the vermin would not cohabitate your bed!  Iron bedframes became quite popular at this time.

In the 1940’s the Futon bed started to make an appearance in North America, whilst in the 1960’s water beds came to the market.  The 1970’s saw the bunkbed become popular with children and the 1980’s saw the introduction of air beds.

The bed has been seen by many people as the most important piece of furniture in the household.  Everyone feels more revived after a good nights’ sleep. 

Nowadays beds are available in all shapes and sizes and can be constructed from numerous different materials, i.e. wood, metal, plastic, upholstered fabric or painted.  Standard sizes range from 3ft, 4ft 6″, 5ft and 6ft, however many local companies can make beds and mattresses to any required size.  Todays market is competitive and customers will often try to haggle on price whether the item is on sale or not!

Advice on bedroom furniture and mattresses

Tuesday, June 8th, 2010

AKKA Furniture’s beds and mattresses are often said to be among the finest available. Combining craftsmanship with the best of contemporary design has been our aim since we started the company. AKKA Furniture began as a bed making firm in 2007 and we’ve been designing and making quality bedroom  furniture, including beds,chests, wardrobes, wardrobes and mirrors ever since. A third of your life is spent in bed, so it’s very important that you choose the right bed for you and your partner.


Size?

You need to consider the size of your bedroom when deciding on bed size. You need enough room to walk around the bed, and don’t forget the rest of your bedroom furniture needs to fit in too. Leave plenty of space for bedroom and wardrobe doors to open if space is tight.

Take into account that most sleep experts (including the Sleep Council) agree the bigger the bed, the better the sleep.

The width of the bed is particularly important if you sleep with a partner. A standard double bed (135cm) gives each person just 69cm of space which is much narrower than a single bed. Also, the average person tosses and turns up to 70 times a night, therefore a wider bed ensures you are both more likely to get a good night’s sleep.

The length of the bed is also important. We recommend that your bed should be 10 – 15cm longer than the tallest partner. As a guide if you are over 6ft tall we recommend a kingsize bed to ensure that you don’t end up sleeping diagonally across the bed which is uncomfortable for you and your partner, as well as bad for you back.


Which Mattress?

Choosing the correct mattress is extremely important to ensure comfort. In 1988, sleep expert Dr Chris Idzikowski conducted a study which found that swapping an uncomfortable old bed for a comfortable new one could account for an average of 42 minutes extra sleep per night – four times that achieved by over the counter sleep aids.

We can supply Dreamworks matresses at AKKA Furniture, delivery time is normally two weeks.

Dodgy Divans Part II

Monday, April 19th, 2010

Dodgy Divans Part II
So, seeing as we’re on the subject of divans I might as well get the rest of the moans out of the way. In for a penny, in for a pound I suppose!
The flaw in the plan
Once, as a child, my parents bought me a brand-new bed, yes, a divan. It was a divan with a difference, the top section lifted open on some sort of sprung mechanism which meant that the entire bottom half of the bed could be used as storage. This was just great, providing you were happy for your ten-year-old son to empty his mattress and bedclothes over the floor every time he wanted to get something out!
A major ‘drawer’ back (groan)
So, we learnt from the flip-top bed experience and moved on. The next step was a more sedate approach involving drawers in a divan base, no more mattress slippage! This time, we found that, not only was the space severely limited, but also, the drawer bottoms were flimsy and generally collapsed once a few blankets had been put in – then they were impossible to open, even when you had managed to claw you way through the fabric hell-hole known as a valance (though I think I’ve already bemoaned valances in a previous post)
Let’s take a look at what we could have done (say in the style of Jim Bowen)
Let’s imagine what life would have been like with a lovely wooden bed. Firstly, we could have done away with any need for flip-top or sliding drawer contraptions. As a child, under the bed would have been a great place to stash a giant bag of lego (which I’m reliably told happens every night at legoland, Windsor). But secondly, there is also a great  ‘grown-up’ solution for neat freaks like me. A couple of beautiful wooden underbed drawers on castors would have been perfect. The bottoms are made out of decent timber, which means they don’t sag and collapse. They slide out easily avoiding the flip-top/drawer collapse/valance issues, and finally, they look great. Not only that, if you ever decide to change your bed and if you buy an akka wooden bed, we don’t see why you’d want to) you don’t have to change your storage at the same time. Simples.
Â
 

Dodgy Divans

Thursday, March 25th, 2010

Looking back the other day through old photographs (when I say old, I mean 1980s old) I noticed just how much home furniture has changed. I’ll be honest with you, my parents still have the wood effect units and melamine wardrobes but most other folk have moved on. The thing I noticed most was the difference in the beds. Every bed in the house was a divan and boy, were they ugly! To make it even worse, they dressed them up in slightly uglier flouncy valances, which seem to defy all laws of taste and interior design decency. Just what were we doing? Instead of a beautiful wooden bed, something which could have defined a room or provided a focal point, we have essentially a wooden box wrapped in fabric. Nothing could more clearly say, ‘this room is not important to me’ more than a divan bed. It seems that bedrooms were just functional; get in, lights off, sleep, wake-up, get dressed, get out! Nowadays bedrooms are where we can wind down, chill-out or lose a Sunday morning. Who would want to do that in a divan when you could be looking at a lovely piece of oiled walnut? I say it’s time for a divan amnesty…without fear of reprise or being mocked by the neighbours we should all be allowed to clear out these sleeping disaster zones once and for all and replace them with something wooden and beautiful!! Come on, chuck ‘em out!!

 

 

 

How a mattress is made

Wednesday, November 11th, 2009

Completing the mattress
• 5 The closing operation is of one of the most highly skilled and critical procedures in the entire process. It is done with a movable sewing head that is mounted on a track. Tape edge operators manually feed the top, bottom, and side panels and a heavy duty binding tape into the sewing machine as it moves around the mattress. As this combination of materials is fed into the machine, the operators uses their skill to feed the proper amount of each material into the machine to produce a professionally tailored product.
• 6 Some of the highest quality mattresses may also feature a pillowtop, a panel filled with soft upholstery and attached to the top and bottom panels of the mattress for a more luxurious feel and appearance. Prequilted, the pillowtop is then taped to the mattress.
Boxsprings
• 7 If the desired boxspring has a spiked coil design, it is made by stapling the bottom of each coil to a flat wooden frame. A wire grid is then placed on top of the springs and, once aligned, manually locked to them. A thin layer of upholstery is applied to the top. If the desired boxspring contains no springs,

Once the cover is quilted, it is cut into top, bottom, and side panels. Next, flanges are added, and hogs rings are stapled to them. Finally, in the closing operation, workers use a movable sewing head mounted on a track to feed the top, bottom, and side panels and a heavy duty binding tape into the sewing machine as it moves around the mattress. The mattress is then ready for packaging.
it consists of a wooden frame that may or may not have a layer of upholstery attached to its top. Regardless of the internal composition, the frame is usually inserted into a pre-sewn cover that encases the top and sides of the unit. A border fabric that matches the mattress exterior is applied to the sides, and a dust cover is added to the face.
Inspection, labeling, and packing
• 8 Once the units are complete, they are inspected for quality. If every thing is in order, they are labeled with the content and the contingent “do not remove” tag, required by law to ensure the consumer that the contents are properly represented in the labeling. The finished product is then transported to the packing area. Here it is inserted by hand or by automated machinery into protective plastic or paper covers. Additional information about the warranty, safety, and care of the product is also included in the packaging.

How a mattress is made

Wednesday, October 28th, 2009

Raw Materials
Mattresses are presently made of many materials, both natural and synthetic. The innerspring, helical, and boxspring components are made from wire; the boxspring wire is usually of a heavier gauge than that used in the innerspring. The insulator consists of semi-rigid netting or wire mesh, and the cushioning layers can comprise a number of different materials including natural fiber, polyurethane foam, and polyester. The flanges are made of fabric, and the hogs rings of metal. Top, bottom, and side panels consist of a durable fabric cover quilted over a backing of foam or fiber, and the binding

Once the completed innerspring unit is received, workers manually apply the insulator. Next, they apply the cushioning layers that will determine the feel and comfort of the final product. Meanwhile, the decorative cover that will serve as the exterior for the top, bottom, and sides is made on a giant quilting machine, which controls a multitude of needles that stitch the cover to a layer of backing material.
tape that holds the ticking together is made of heavy-duty, fibrous, synthetic material. The underlying boxspring may consist of either a wooden frame with slats or of metal coils similar to those used in the mattress itself. The boxspring may be upholstered, but, even if it is not, it always receives a fabric covering.
The Manufacturing
Process
Building mattress layers
• 1 Most mattress manufacturers subcontract the production of the innerspring unit to an outside firm that specializes in making springs. Once the completed spring unit is received and inspected, the workers manually apply the insulator. Next, they apply the cushioning layers that will determine the feel and comfort of the final product.
• 2 While the mattress is being “built up” in one part of the plant, the decorative cover that will serve as the exterior for the top, bottom and sides is being made in another part. Usually this cover is made on a giant quilting machine, which controls a multitude of needles that stitch the cover to a layer of backing material. The stitching chosen serves both useful and ornamental purposes, as it must prevent the mattress cover from slipping or creeping over the layers of cushioning in addition to creating a visually pleasing exterior.
• 3 Once the fabric is quilted, it is cut into panels that will fit the top and bottom of the mattress. The side panels are often cut from this same composite or made separately on a border machine. If side handles or vents are to be added, they are attached to the side panels before these are applied to the mattress.
Attaching the flanges
• 4 Specially modified sewing machines are used to attach the flanges to the top and bottom panels, and the hogs rings are stapled to the flanges. Everything is now ready for the closing operation, during which the hogs rings will be secured to the innerspring unit.

History of the mattress

Thursday, October 22nd, 2009

Today, most mattresses are manufactured according to standard sizes. This standardization was initiated by the industry to resolve any dimensional discrepancies that might occur between companies that manufacture beds and companies that make mattresses. The sizes include the twin bed, 39 inches wide and 74 inches long; the double bed, 54 inches wide and 74 inches long; the queen bed, 60 inches wide and 80 inches long; and the king bed, 78 inches wide and 80 inches long.

The “core” of a typical mattress is the innerspring unit, a series of wire coils that are attached to one another with additional wire. The upholstery layers are affixed to the innerspring: the first, called the insulator, is fitted directly onto the innerspring and prevents the next layer, the cushioning, from molding to the coils. While the insulator is fairly standard, the number of cushioning layers can vary widely in number, ranging from two to eight layers and from 1/4 inch to 2 inches (.63 to 5 centimeters) in thickness. Moving outward, the next component is the flanges, connecting panels that are attached to the mattress’s quilted cover with large, round staples called hogs rings. The top, bottom, and side panels of the mattress are stitched together with border tape.

While a wide variety of springs are designed to accommodate special needs and situations, the four most commonly used coils are the Bonnell, the Offset, the Continuous, and the Pocket System. The Bonnell springs are hourglass-shaped and knotted at both ends. The Offset design is similarly hourglass-shaped, but its top and bottom are flattened to facilitate a hinging action between the coils. The Continuous innerspring consists of one extremely long strand of steel wire configured into S-shaped units. Finally, in the Pocket System, each coil is encased in a fabric casing that also connects it to neighboring coil-casing units.

A typical mattress contains between 250 and 1,000 coil springs, and mattresses that use fewer coils normally require a heavier gauge of wire. It is not uncommon for an innerspring unit to require as much as 2,000 linear feet (610 meters) of steel wire. The individual coils can be joined in several ways. One common method is to use helicals—corkscrew-shaped wires that run along the top and bottom of the springs, lacing the coils together. Rigid border wires are sometimes attached around the perimeters to stabilize the unit.

Most manufacturers also produce foundation mattresses or boxsprings that lie directly beneath the mattress, resting on the frame of the bed. One of the most common types of box spring foundations uses a spiked coil configuration, in which the springs are narrow at the bottom but spiral to a wider diameter at the top. While a spring system provides the most common type of boxspring support, torsion bars are also sometimes used. Other foundation mattresses contain no springs at all but consist of a built-up wooden frame.

History of the Mattress

Friday, October 9th, 2009

From the available evidence, it seems fairly certain that the concept of the mattress originated during prehistoric times. By lying on piles of leaves, straw, and animal skins, early humans were able to sleep more comfortably and more soundly than they could have on hard surfaces. As greater numbers of people left a nomadic, hunting existence for a settled, agrarian lifestyle, primitive furnishings, including the bed, began to develop.
To a large extent the development of the mattress is closely linked with that of the bed. In many ancient societies, the bed was considered the most important piece of furniture in the household; often, it provided a central gathering place for dining and relaxing as well as sleeping. Over the centuries, bed frames became more elaborate for those who could afford luxury; however, mattresses themselves remained unsophisticated—and uncomfortable. Until the twentieth century, they generally consisted of lumpy pads filled with horse hair, cotton, or rags. Poorer people relied on ticks—fabric sacks stuffed with straw, corn cobs, or other crop debris. In addition to offering an inconsistent texture, such primitive mattresses were difficult to clean—and they generally started out dirty, stuffed as they were with agricultural debris that often entered the pad or ticking with soil and insects. However, they offered one concrete advantage: made at home from cast-off farm goods, they were cheap. Even late in the nineteenth century when small local manufacturers began to produce mattresses commercially, the items remained inexpensive because early mattress makers continued to rely on extremely inexpensive stuffing (usually, unusable fabric remnants discarded by second-hand tailors).
Mattresses with stabilizing interior springs, probably the single most significant advance in mattress design, were first developed during the mid-1800s. By placing a set of uniform springs inside layers of upholstery, mattress manufacturers could imbue their product with a firm, resilient, and uniform texture. However, because so-called innerspring mattresses were expensive to manufacture, only luxury ships and hotels that could pass the cost along to their affluent patrons purchased them initially. It was not until after World War I that innerspring mattresses were mass-produced by Zalmon Simmons, Jr., the president of a company that had theretofore produced bedsteads. Despite the fact that Simmons asked 40 dollars—more than twice the cost of the finest horse hair mattress available at that time—for his innerspring mattress in 1926, his products proved so comfortable that millions of Americans purchased them.
To render potential customers more willing to spend what must have struck many as a small fortune on his innerspring mattress, Simmons promoted the advantages of a good night’s sleep. The effectiveness of this marketing strategy has only increased over the years, as subsequent research has confirmed that abundant, high-quality sleep constitutes a fundamental component of good health. Today’s sophisticated mattresses improve sleeping comfort in several ways. First, through a variety of enhanced innerspring designs, modern mattresses distribute the weight of the body over a broad area; this also helps to prevent differential wear on the mattress. In addition, mattresses offer surfaces of appropriate softness and flexibility to help keep the spine in its naturally curved position. However, contemporary mattress manufacturers carefully avoid excessively soft surfaces that would distort the position of the sleeper’s spine, resulting in discomfort or even pain.
Presently, the consumer demand for mattresses is fairly consistent. In 1990, approximately 16 million mattresses were sold in the United States. Together with foundations, mattresses accounted for about $4 billion in retail sales. With the exception of a few large companies, most mattress manufacturers are fairly small, community-based operations. Of the approximately 825 mattress factories across the United States, most are still owned and operated by the founding families.